If you can see haze, droplets or white streaks between the panes of a double-pane window, and wiping both sides doesn't help, the seal around the glass has failed. Moist outside air has leaked into the space between the panes, and the insulating gas that was there has escaped.
The good news is that a failed seal is rarely an emergency, and you often don't need a whole new window. This guide explains your three options and what each one costs.
Why windows fog between the panes
Double- and triple-pane windows are built as sealed insulated glass units (IGUs). Two or three sheets of glass are held apart by a spacer, sealed around the edge, and often filled with argon or krypton gas. A desiccant inside the spacer absorbs any moisture trapped during manufacturing.
Over time, sun, heat and cold make the glass expand and contract. Eventually the edge seal can crack. Once it does, humid air works its way in, the desiccant saturates, and moisture condenses on the inside surfaces of the glass. Common causes include:
- Age. Many seals last 15 to 25 years, but cheaper units can fail in under 10.
- Direct sun on south- and west-facing windows.
- Pressure washing or harsh cleaners near the edge of the glass.
- Poor manufacturing or installation, such as glass set directly on the frame without setting blocks.
Is a fogged window a problem?
Mostly it's a cosmetic and comfort problem:
- Energy loss is modest. Losing the argon fill reduces the window's insulating value, but a fogged double-pane window still performs much better than single-pane glass. Expect a small drop in efficiency, not a big jump in your bill.
- The view gets worse over time. Mineral deposits can etch the inner glass surface permanently.
- It can signal other issues. If several windows of the same age are fogging, more will likely follow.
It is not a structural or safety issue, so you can take time to compare options.
Option 1: Defogging service ($75–$200 per window)
Some companies drill small holes in the glass, clean the interior surfaces with a solution, dry them, and plug the holes with a vent or seal.
Pros: cheapest option and restores the view. Cons: the gas fill is not restored, so efficiency doesn't return. Results vary, and some units fog again. It can void any remaining manufacturer's warranty.
Best for: picture windows where the view matters and you plan to replace windows within a few years anyway.
Option 2: Replace the glass unit only ($200–$600 per window)
A glass shop measures the existing IGU, orders a new one, and installs it in your existing frame and sash. Larger or specialty glass (tempered, low-E, triple-pane or oddly shaped units) costs more.
Pros: restores full insulating performance at a fraction of a full window's price. Keeps your existing frames and trim intact. Cons: only makes sense if the frame and sash are in good shape. Some vinyl windows are built with glass that's hard to remove without damaging the sash.
Best for: frames that are still solid, square and operating well.
Option 3: Replace the whole window ($600–$1,200+ per window)
A full replacement window gets you new glass, new seals and a new frame. Standard vinyl replacement windows typically cost $600 to $1,200 installed. Fiberglass runs about $900 to $1,800, and wood $1,000 to $2,000. Our window replacement cost guide breaks this down further.
Pros: fixes drafts, rot, sticking sashes and hardware problems at the same time. Lets you upgrade to better low-E coatings or triple-pane glass. Cons: the most expensive option per window.
Best for: older windows with other problems, or when several windows are failing at once.
How to decide
| Situation | Best option |
|---|---|
| One or two foggy windows, frames in good shape | Replace the glass unit |
| Window still under warranty | Call the manufacturer first, glass may be covered |
| Many windows fogging, frames 20+ years old | Plan a full replacement in phases |
| Drafts, rot or sashes that stick | Replace the whole window |
| Large fixed picture window, budget is tight | Defogging or new glass unit |
Check your warranty first
Many manufacturers warranty the glass seal for 10 to 20 years, and some offer lifetime coverage to the original owner. Look for a label or etched logo in the corner of the glass, which often includes the manufacturer and date. Even if labor isn't covered, the replacement glass might be.
Will new windows lower my energy bill?
Less than most ads suggest. Replacing single-pane windows with ENERGY STAR-certified windows can save a few hundred dollars a year in many climates, but replacing working double-pane windows saves much less. If your main goal is a lower bill, air sealing and attic insulation almost always pay back faster. Windows are worth replacing for comfort, noise, condensation and appearance, with energy savings as a bonus. See Are energy-efficient windows worth it? for the numbers.
Condensation on the inside or outside surface is different
If the fog is on the room side of the glass, that's indoor humidity condensing on a cold surface. Run bath and kitchen fans, check for a humidifier set too high, and make sure the window isn't blocked by heavy drapes. If it's on the outside surface on cool mornings, that's actually a sign of a well-insulated window, because the outer pane stays cold.
Getting a glass unit replaced
Call a local glass shop rather than a full-window installer. They'll measure the existing glass unit, check the frame, and order a new sealed unit with matching coatings and thickness. Expect about one to three weeks for manufacturing, then a short visit to install it.
Frequently asked questions
Can you fix fog between window panes yourself?
Not reliably. DIY kits that drill and dry the space don't restore the seal or the gas fill. Replacing the sealed glass unit through a local glass shop is the most durable fix short of a new window.
How much does it cost to replace a foggy window pane?
Replacing just the insulated glass unit usually costs $200 to $600 per window. A complete vinyl replacement window typically costs $600 to $1,200 installed.
Does a foggy window lose much energy?
Some, because the argon fill escapes and moisture reduces performance, but it still insulates far better than a single pane. The bigger issues are the view and the likelihood that more windows of the same age will fail.
Is window seal failure covered by warranty?
Often, yes. Many manufacturers cover seal failure for 10 to 20 years or longer. Check the label in the corner of the glass and contact the manufacturer before paying for repairs.
Should I replace all my windows if one is foggy?
Not necessarily. If the frames are in good shape, replace only the failed glass units. If many windows are the same age and showing problems, a phased replacement can spread out the cost.
How long do window seals last?
Many seals last 15 to 25 years. Heat, sun exposure and manufacturing quality affect how long they hold.
Can foggy windows cause mold?
The moisture is sealed between the panes, so it doesn't usually cause mold in the room. Condensation on the room side is a separate humidity issue.
Is fog between window panes dangerous?
No. It's a sign the seal has failed, which affects the view and insulating value, but it isn't a safety issue.