HomeShark
How It Works Incentives Blog Free Audit →
← Blog HVAC

What Size AC Do I Need? Tonnage by Square Footage and Climate

· · 5 min read

Central air conditioners are sized in tons, and most homes need between 1.5 and 5 tons. A common starting point is 1 ton for every 400 to 700 square feet, but the right size for your home depends on climate, insulation, windows, ceiling height and how leaky the house is.

Getting the size right matters. An oversized AC costs more to buy, short-cycles, wears out sooner and leaves the house clammy. An undersized one runs constantly and can't keep up on the hottest days.

What does "tons" mean?

One ton of cooling equals 12,000 BTUs per hour, the amount of heat needed to melt a ton of ice in a day. So:

AC sizeBTUs per hour
1.5 tons18,000
2 tons24,000
2.5 tons30,000
3 tons36,000
3.5 tons42,000
4 tons48,000
5 tons60,000

Residential central systems generally top out at 5 tons. Larger homes often use two systems or zoned equipment.

AC size chart by square footage

This chart is a starting estimate for a reasonably insulated home with standard 8-foot ceilings.

Home size (sq ft)Hot climate (South, Southwest)Moderate climate (Mid-Atlantic, Midwest)Mild climate (Pacific Coast, Northern states)
1,0002 tons1.5–2 tons1.5 tons
1,5003 tons2.5 tons2 tons
2,0003.5–4 tons3 tons2.5–3 tons
2,5004–5 tons3.5–4 tons3–3.5 tons
3,0005 tons or two systems4–5 tons3.5–4 tons

Homes with high ceilings, lots of west-facing glass, poor insulation or leaky ducts need more. Well-insulated, tight homes with good windows often need less, sometimes by a full ton.

Why rules of thumb often get it wrong

Square footage is only one input. Two 2,000 square foot homes in the same city can need very different systems:

  • Insulation and air sealing. A well-insulated attic and tight house can cut the cooling load substantially.
  • Windows. Large west-facing windows can add a significant amount of afternoon heat. Low-E glass and shading reduce it.
  • Ceiling height. Vaulted ceilings mean more air to cool.
  • Duct location and condition. Leaky ducts in a hot attic lose cooling before it reaches your rooms.
  • Occupants and appliances. More people, cooking and electronics add heat.
  • Orientation and shade. A shaded home needs less cooling than one in full sun.
  • Humidity. In humid climates, the system must remove moisture, not just lower temperature.

Many existing homes are oversized because previous installers simply matched the old unit or added a margin "to be safe." If you've added insulation, air sealing or new windows since the last system went in, your home may need a smaller unit now.

Manual J: the right way to size an AC

A Manual J load calculation is the industry standard method, published by the Air Conditioning Contractors of America. A contractor measures your home and enters details about walls, insulation, windows, orientation, air leakage and local climate into software that calculates the actual heating and cooling loads, room by room.

Ask every contractor quoting a replacement whether they will perform a Manual J. Be wary of anyone who sizes the new system just by looking at the old one. Some states and local codes require load calculations for new installations.

Related calculations include Manual S, which selects equipment that matches the load, and Manual D, which designs ductwork to deliver the right airflow.

Signs your current AC is the wrong size

Oversized: - Runs in short bursts of a few minutes, then shuts off. - House feels cool but damp or clammy. - Big temperature differences between rooms. - Frequent repairs from on-off cycling.

Undersized: - Runs constantly on hot days. - Can't get below the high 70s in the afternoon. - High bills despite a newer, efficient unit.

What about variable-speed systems?

Variable-speed and two-stage air conditioners and heat pumps can run at lower capacity most of the time and ramp up only on the hottest days. They're more forgiving of sizing, dehumidify better and run more quietly. They usually cost more upfront but can be more efficient and comfortable.

Sizing for a heat pump

If you're replacing an AC with a heat pump, sizing must account for heating needs too, especially in colder climates. See what size heat pump do I need.

What a new AC costs by size

Most central AC replacements cost $5,000 to $12,000 installed. Larger tonnage, higher efficiency and new line sets or indoor coils push the price up. See our HVAC replacement cost guide. Choosing the right size can save money upfront, because a correctly sized system is often smaller than the one it replaces.

Mini-splits and room ACs

For a single room, garage or addition, ductless mini-splits and window units are sized in BTUs:

Room size (sq ft)Approx. BTUs
150–2506,000
250–3508,000
350–45010,000
450–55012,000
550–70014,000–15,000
700–1,00018,000

Add about 10 percent for very sunny rooms and about 4,000 BTUs for a kitchen.

What a contractor should ask during sizing

A good contractor doing a load calculation will ask about or measure:

  • The home's square footage, ceiling heights and number of floors.
  • Insulation levels in the attic, walls and floors.
  • Window sizes, types and which direction they face.
  • Air leakage, ideally from a blower door test.
  • Duct location, size and condition.
  • How many people live in the home and how it's used.
  • Comfort problems in specific rooms.

If a contractor doesn't ask about these and quotes a size within minutes, that's a red flag.

Frequently asked questions

What size AC do I need for a 2,000 square foot house?

Typically 3 to 4 tons, depending on climate and insulation. Hot southern climates are usually at the upper end, and mild or well-insulated homes at the lower end. A Manual J load calculation gives the exact answer.

How many square feet does a 3-ton AC cool?

Roughly 1,500 to 2,100 square feet, depending on climate, insulation, windows and ceiling height.

Is it better to oversize an AC?

No. Oversized systems short-cycle, remove less humidity, cost more and can wear out sooner.

How many BTUs per square foot for air conditioning?

About 20 to 30 BTUs per square foot is a common rough range, but insulation, windows and climate change the answer significantly.

What is a Manual J calculation?

It's the industry-standard method for calculating a home's heating and cooling loads based on its construction, windows, orientation, air leakage and climate. It's the best way to size a new system.

Can I replace my AC with the same size?

You can, but it may not be right. If you've improved insulation, windows or air sealing, or the old system was oversized, a smaller unit may work better.

How do I know what size my current AC is?

Look at the model number on the outdoor unit's data plate. A number like 24, 30, 36, 42, 48 or 60 usually indicates thousands of BTUs: 36 means 3 tons.

What size AC do I need for 1,500 square feet?

Usually about 2 to 3 tons, depending on climate, insulation and windows. Hot climates are at the upper end.

Does ceiling height affect AC size?

Yes. Higher ceilings mean more air volume and often more wall and window area, which can increase the cooling load.

Related cost guide
HVAC Replacement Cost Guide →
AC, furnace and heat pump prices for 2026.
CA
Head of Technology Partnerships, HomeShark
Colin works with the solar, HVAC, roofing and window companies and the data providers behind HomeShark's home energy reports and quotes.

Find Your Home's Savings Potential

Enter your address for a free personalized energy audit — see the rebates we know of for your state.

Free Audit
Find every rebate available for your home
✓ 100% free ✓ Instant AI report
Related Articles
HVAC
What Size Heat Pump Do I Need? Sizing Chart and Cold-Climate Tips
HVAC
Repair or Replace Your AC? The Cost Math, Step by Step
HVAC
How Long Does an AC Unit Last? Lifespan and Signs It's Time to Replace