If you're a Pacific Gas and Electric customer, a high bill is often a rate story first and a usage story second. PG&E's residential rates rose sharply over the past decade, and even after several decreases since 2024 they remain among the highest in the country. That means every kWh you use costs more than it would almost anywhere else, so small changes in usage show up quickly on your bill.
How high are PG&E rates?
PG&E's average residential bundled rate was a little over 41¢ per kWh at the start of 2026, before a March 2026 decrease. PG&E says its bundled residential rates have come down several times since January 2024, but the average rate is still roughly double the national average of about 17¢. Some third-party estimates put the 10-year increase in PG&E's average residential rate at around 70 percent.
PG&E's own example bill for a typical non-CARE customer using 500 kWh a month was a little over $200 in early 2026. A home using 800 or 1,000 kWh pays proportionally more, especially in higher-priced hours on time-of-use plans.
Rates change several times a year, so check PG&E's current rate page for your plan.
The main reasons your PG&E bill is high
1. High per-kWh prices
Costs for wildfire mitigation, undergrounding lines, vegetation management, grid hardening and transmission are recovered through rates. Those are largely outside your control, which is why reducing usage, and when it happens, matters so much.
2. Time-of-use pricing
Most PG&E residential customers are on time-of-use plans, where electricity costs more during the evening peak, typically 4 to 9 p.m. Running the dryer, dishwasher, oven, AC and EV charger during those hours costs more than running them earlier or later.
3. Summer AC and inland heat
Coastal Bay Area homes use relatively little air conditioning, but homes in the Central Valley, Sacramento, Fresno and inland areas can run AC for months. At PG&E's rates, an older AC can easily add $100 or more to a summer bill. See how much it costs to run an AC.
4. Usage above your baseline allowance
Some PG&E plans include a baseline allowance, a set amount of lower-priced electricity based on your climate zone and heating type. Usage above it costs more. Large homes, EVs, pools and electric heat push many households above baseline.
5. Winter gas bills
If PG&E also supplies your gas, winter heating can make your combined bill much higher. Gas rates have risen to fund pipeline safety work, and cold months increase usage.
6. Community choice aggregators
Many PG&E customers buy electricity from a community choice aggregator (CCA) such as MCE, Peninsula Clean Energy, San José Clean Energy or Sonoma Clean Power, while PG&E still delivers it. Your bill then shows PG&E delivery charges plus CCA generation charges. Rates for each part can change at different times.
7. Fixed charges
California's large utilities are shifting part of their costs into a flat monthly charge, with lower per-kWh prices to offset it. Look for a fixed monthly charge line on your bill. It doesn't depend on usage, so lower-usage homes may see a smaller benefit from cutting kWh.
How to read a PG&E bill
- Find your rate plan, for example E-TOU-C or E-ELEC, on the electric details page.
- Check total kWh and the billing period, then calculate your all-in rate: total electric charges divided by kWh.
- Look at usage by time period if you're on a time-of-use plan. How much falls in peak hours?
- Compare with the same month last year in your online account.
- Check for CCA generation charges on a separate page if you're served by one.
See how to read your utility bill for more.
How to lower a PG&E bill
Shift usage out of peak hours
Run laundry, dishwashers, pool pumps and EV charging before 4 p.m. or after 9 p.m. Precool the house in the early afternoon on hot days, then let it drift up during the peak.
Check your rate plan
PG&E's online rate comparison tool shows what you'd pay on other plans based on your actual usage. Plans designed for homes with EVs, heat pumps or solar can save money if your usage fits.
Sign up for discounts if you qualify
- CARE provides a discount of roughly 40 percent for income-qualified households.
- FERA offers a smaller discount for households slightly above CARE limits.
- Medical Baseline provides extra lower-priced energy for people who need medical equipment or have qualifying conditions.
Cut cooling and heating loads
- Seal air leaks and add attic insulation. See air sealing.
- Replace an AC or heat pump older than 12 to 15 years.
- Use a smart thermostat with time-of-use awareness.
Replace an electric resistance water heater
A heat pump water heater uses about 60 to 70 percent less electricity, and the savings are larger at PG&E's rates than almost anywhere else.
Consider solar and a battery
High rates make solar valuable in PG&E territory, but under California's net billing rules, exported solar earns much less than the retail rate. Systems sized to your usage and paired with a battery tend to perform best. See California solar incentives.
Use budget billing
PG&E's budget billing averages your bill over 12 months to smooth out seasonal spikes.
How your PG&E bill compares
Statewide, California households used about 494 kWh a month on average in 2025, among the lowest in the country, but paid about $155 a month because of high rates. See average electric bill by state. If your usage is far above that and your home isn't unusually large, look for an aging AC, pool pump, electric heat, or an EV charging at peak times.
Frequently asked questions
Why is my PG&E bill so high this month?
Common reasons are hot or cold weather, more usage during peak hours on time-of-use plans, usage above baseline, a longer billing period, or rising gas usage in winter. PG&E's per-kWh prices are also far above the national average.
What is PG&E's average rate per kWh?
PG&E's average bundled residential rate was a little over 41¢ per kWh in early 2026, before a decrease in March 2026. Your actual rate depends on your plan and time of use.
What are PG&E's peak hours?
On most residential time-of-use plans, the peak period is 4 p.m. to 9 p.m. Check your plan for details.
How can I lower my PG&E bill?
Shift usage out of peak hours, compare rate plans, apply for CARE or FERA if eligible, improve insulation and air sealing, and replace old cooling and water heating equipment.
Does solar make sense with PG&E?
Often yes, because rates are high, but under net billing the best results come from right-sized systems and batteries that let you use more of your own solar in the evening.
What is a CCA on my PG&E bill?
A community choice aggregator buys electricity for customers in its area, while PG&E handles delivery and billing. Your bill shows both sets of charges.
Why is my PG&E gas bill high in winter?
Heating usage rises in cold months, and gas rates have increased to fund pipeline safety and reliability work.
Does PG&E offer budget billing?
Yes. Budget billing averages your costs over 12 months so bills are more consistent.