Most US homes need about 15 to 25 solar panels to cover their electricity use. The average home uses about 874 kWh a month, according to 2025 EIA data, and needs a system of roughly 7 to 8 kW. With today's typical 400 to 450 watt panels, that's about 17 to 19 panels.
Your number depends on three things: how much electricity you use, how much sun your roof gets, and the wattage of the panels you choose. Below is a simple formula, a chart you can use in a minute, and the factors that move the number up or down.
Want the exact number for your roof? Enter your address and HomeShark estimates your roof's solar potential and system size using satellite roof data for your home.
The formula
Number of panels = annual kWh use ÷ annual production per kW ÷ panel size in kW
Step 1: Find your annual electricity use
Add up the kWh on your last 12 electric bills, or multiply a typical month by 12. Use kWh, not dollars. If you only have a dollar amount, divide your monthly bill by your rate per kWh to estimate it. See how to read your utility bill.
Step 2: Estimate production per kW in your area
Each kilowatt of solar panels produces roughly:
| Region | Typical annual production per kW installed |
|---|---|
| Cloudier areas (Pacific Northwest, Great Lakes, parts of New England) | about 1,100–1,250 kWh |
| Average (much of the Midwest, Mid-Atlantic, Northeast) | about 1,300–1,450 kWh |
| Sunny (Southwest, California, Texas, Florida, Southeast) | about 1,500–1,700 kWh |
These assume a south, east or west-facing roof with little shade. North-facing roofs and shade reduce production.
Step 3: Divide by panel wattage
Most residential panels sold in 2026 are about 400 to 450 watts (0.40 to 0.45 kW).
Example
A home uses 10,500 kWh a year in an average-sun area: - 10,500 ÷ 1,400 = 7.5 kW system - 7.5 ÷ 0.42 = about 18 panels of 420 watts
Solar panel chart by monthly usage
Using 420-watt panels:
| Monthly use (kWh) | Cloudy area (1,150 kWh/kW) | Average area (1,400 kWh/kW) | Sunny area (1,650 kWh/kW) |
|---|---|---|---|
| 500 | 13 panels (5.2 kW) | 11 panels (4.3 kW) | 9 panels (3.6 kW) |
| 750 | 19 panels (7.8 kW) | 16 panels (6.4 kW) | 13 panels (5.5 kW) |
| 1,000 | 25 panels (10.4 kW) | 21 panels (8.6 kW) | 18 panels (7.3 kW) |
| 1,250 | 32 panels (13.0 kW) | 26 panels (10.7 kW) | 22 panels (9.1 kW) |
| 1,500 | 38 panels (15.7 kW) | 31 panels (12.9 kW) | 26 panels (10.9 kW) |
| 2,000 | 50 panels (20.9 kW) | 41 panels (17.1 kW) | 35 panels (14.5 kW) |
The chart sizes the system to cover 100 percent of annual use. Many homeowners choose a smaller system, as explained below.
Panels needed by panel wattage
For the average US home using about 10,500 kWh a year in an average-sun area (7.5 kW):
| Panel wattage | Panels needed |
|---|---|
| 370 W | 21 |
| 400 W | 19 |
| 420 W | 18 |
| 450 W | 17 |
Higher-wattage panels mean fewer panels and less roof space, but they usually cost more per panel. What matters most for price is the total system size in kW.
Two quick examples by location
Both homes have a $150 monthly bill at 17¢ per kWh, or about 880 kWh a month.
- Phoenix, Arizona (sunny): 10,600 kWh ÷ 1,650 = 6.4 kW, or about 16 panels.
- Seattle, Washington (cloudier): 10,600 kWh ÷ 1,150 = 9.2 kW, or about 22 panels.
Same usage, six more panels, because the Seattle panels produce less each year.
How much roof space do you need?
A typical 400 to 450 watt panel is roughly 18 to 22 square feet. Eighteen panels need about 350 to 400 square feet of usable roof, plus space for fire code setbacks from ridges, edges and valleys, which many jurisdictions require.
If your best roof faces are too small, installers may: - Use higher-wattage panels to fit more kW in the same space. - Add panels to east and west faces, which produce somewhat less than south-facing ones. - Recommend a ground mount if you have yard space.
What changes the number
Roof direction and tilt
South-facing roofs produce the most in the US. East and west faces produce somewhat less, often 10 to 20 percent less depending on tilt and location. North-facing roofs are usually poor candidates.
Shade
Trees, chimneys and neighboring buildings cut production, especially in morning and afternoon. Microinverters or optimizers reduce the impact of partial shade.
Future electricity use
Planning an EV, heat pump or heat pump water heater? Each can add 2,000 to 4,000 kWh a year or more. Adding panels during the original installation is usually cheaper than expanding later.
Efficiency upgrades
Reducing usage first with air sealing, insulation and efficient equipment means you need fewer panels. See our home energy efficiency checklist.
How your utility credits exports
This matters more than most people expect: - Full retail net metering: sizing to cover about 100 percent of annual use usually makes sense. - Net billing or low export rates: a smaller system that you use directly often pays back faster. Covering 60 to 80 percent of use, or adding a battery, can be the better choice. See net metering explained.
Budget and payback
Bigger isn't always better. The last few panels on an oversized system may produce power you export for very little credit. Ask installers to model two or three sizes and compare payback. See is solar worth it.
What does that many panels cost?
Typical installed prices run about $2.50 to $3.50 per watt before incentives in 2026. A 7.5 kW system of about 18 panels typically costs $18,750 to $26,250. The federal homeowner tax credit ended for systems installed after 2025, though leases and PPAs may still reflect a federal credit claimed by the system owner. See our solar panel cost guide for prices by system size.
Check your estimate before you get quotes
- Gather 12 months of kWh usage.
- Use the chart above to estimate a system size.
- Note any planned EV, heat pump or other big electric loads.
- Check your utility's export rules.
- Get a roof-specific estimate. A free HomeShark report uses satellite roof data for your address to estimate usable roof area, sun exposure and system size.
- Compare at least three installer quotes on price per watt and estimated production.
Related guides
- 10 kW solar system: cost and output
- Is my roof good for solar?
- How much do solar panels save per month?
Frequently asked questions
How many solar panels does it take to power a house?
Most US homes need about 15 to 25 panels. An average home using about 874 kWh a month needs roughly a 7 to 8 kW system, or about 17 to 19 panels of 400 to 450 watts.
How many solar panels do I need for 1,000 kWh a month?
About 18 to 25 panels of 420 watts, depending on your location. Sunny areas need fewer, about 18. Cloudier areas need more, about 25.
How many solar panels do I need for a 2,000 square foot house?
Square footage is only a rough guide. A 2,000 square foot home often uses 800 to 1,200 kWh a month, which works out to about 14 to 30 panels depending on usage, climate and panel wattage. Your electric bills give a much better estimate.
How much roof space do solar panels need?
A typical 400 to 450 watt panel takes about 18 to 22 square feet. An 18-panel system needs roughly 350 to 400 square feet, plus required setbacks.
Should my solar system cover 100 percent of my electricity use?
With full retail net metering, sizing close to 100 percent usually makes sense. Where exports earn low credits, covering 60 to 80 percent or adding a battery often gives a better return.
How many solar panels do I need to run an EV?
An EV driven 12,000 miles a year uses about 3,000 to 4,000 kWh, which adds roughly 5 to 7 panels of 420 watts in an average-sun area.
How many kWh does one solar panel produce?
A 420-watt panel produces roughly 480 to 700 kWh a year, depending on location, roof direction and shade.