Before you compare solar quotes, it's worth knowing whether your roof is a good fit. The best solar roofs face south, east or west, get sun most of the day, have enough open space, and won't need replacing for at least 10 to 15 years. Many roofs that aren't perfect still work well. A few are better skipped.
Want a quick answer for your home? Enter your address and HomeShark estimates your roof's solar potential, usable area and system size from satellite roof data.
The 6-point checklist
| Factor | Great | Workable | Poor |
|---|---|---|---|
| Direction | South | East or west | North (in most of the US) |
| Shade | Little or none, 9 a.m. to 3 p.m. | Some morning or late afternoon | Heavy shade most of the day |
| Roof age | New or under 10 years | 10–15 years left | Needs replacing soon |
| Usable area | 350+ sq ft unshaded | 200–350 sq ft | Under 200 sq ft |
| Pitch | 15–40 degrees | 5–15 or 40–50 degrees | Very steep or complex |
| Material | Asphalt shingle, standing seam metal | Tile, flat membrane | Slate, wood shake |
1. Roof direction
In the US, south-facing roofs produce the most energy over a year. East- and west-facing roofs typically produce about 10 to 20 percent less, which is often still well worth it. West-facing panels produce more in the late afternoon, which can be valuable on time-of-use rates where evening power costs more.
North-facing roofs usually produce too little in most of the country, except at very low pitches or in the far South.
2. Shade
Shade is the most common deal-breaker. Even partial shade on a few panels can cut output noticeably, especially with traditional string inverters. Look at your roof at different times of day and season:
- Trees, especially tall ones on the south side. Remember they grow.
- Chimneys, dormers and vents that cast shadows.
- Neighboring buildings.
Microinverters or power optimizers reduce the impact of partial shade by letting each panel work independently. A good installer will use shade analysis tools to estimate production loss.
3. Roof age and condition
Solar panels last 25 to 30 years or more. If your roof will need replacing within about 10 to 15 years, it's usually best to replace it before installing solar. Removing and reinstalling panels later can cost several thousand dollars.
| Roof type | Typical lifespan |
|---|---|
| Architectural asphalt shingles | 20–30 years |
| Standing seam metal | 40–70 years |
| Concrete or clay tile | 50+ years (underlayment 20–30) |
See how long a roof lasts and signs you need a new roof.
4. Usable roof area
A typical 400 to 450 watt panel takes about 18 to 22 square feet. An average 7 to 8 kW system of about 18 panels needs roughly 350 to 400 square feet of usable, unshaded roof, plus fire code setbacks from ridges, edges and valleys in many areas. Smaller roofs can still host a smaller system, and higher-wattage panels fit more power in less space. See how many solar panels do I need.
5. Roof pitch
Most residential roofs between about 15 and 40 degrees work well. Flat or very low-slope roofs can use tilted racking. Very steep roofs are harder to install on safely, which may raise labor costs.
6. Roofing material
- Asphalt shingles: the easiest and most common.
- Standing seam metal: excellent, since panels clamp onto the seams without roof penetrations.
- Tile: workable but more expensive, because tiles must be removed or replaced around mounts.
- Flat membrane roofs: use ballasted or attached racking. Coordinate with the roofer to protect warranties.
- Slate and wood shake: fragile or flammable, and often not recommended.
Other things that affect solar on your roof
Structural capacity
Most modern roofs can carry the weight of solar panels, which add only a few pounds per square foot. Older homes may need an engineer's review.
HOA rules
Many states limit HOA bans on solar, but HOAs can often set placement rules. Get approval in writing before installation.
Electrical panel
Older panels may need an upgrade to connect solar, which adds cost.
Your utility's rules
Export compensation affects how much your roof's production is worth. See net metering explained.
What if your roof isn't a good fit?
- Ground-mounted solar if you have yard space with good sun.
- Solar carports or pergolas.
- Community solar, a subscription to a local solar farm that credits your bill. See rooftop vs. community solar.
- Efficiency upgrades first. Lowering usage reduces the system size you'd need later.
How to check your roof
- Use satellite tools. A free HomeShark report estimates sun exposure, usable roof area and system size for your address.
- Walk around your home at 10 a.m., noon and 3 p.m. and note shade.
- Check your roof's age from records or a roofer.
- Get installer site assessments, including shade analysis and structural review.
Solar potential by roof face: an example
A typical gable roof has two large faces. Here's roughly how production compares for the same 4 kW of panels on each face at a moderate pitch in the continental US:
| Roof face | Relative annual production |
|---|---|
| South | 100% |
| Southeast or southwest | about 95–98% |
| East or west | about 80–90% |
| Northeast or northwest | about 65–75% |
| North | about 55–70% |
A home with an east-west gable roof can still be a great solar candidate by using both faces. A south-facing face is ideal, but it's not required.
Common roof problems installers find
- Soft or rotted decking that needs repair before mounting.
- Undersized rafters in older homes, which may need reinforcement.
- Too many vents and penetrations that break up usable space.
- Skylights that can't be covered.
- Damaged flashing around chimneys that should be fixed before panels block access.
Frequently asked questions
Does my roof have to face south for solar?
No. East- and west-facing roofs typically produce about 10 to 20 percent less than south-facing roofs and are often still good candidates. North-facing roofs are usually poor in most of the US.
How much shade is too much for solar panels?
If your best roof areas are shaded for much of the 9 a.m. to 3 p.m. window, production may be too low. Microinverters or optimizers help with partial shade.
Should I replace my roof before installing solar?
If it has less than about 10 to 15 years of life left, yes. Removing and reinstalling panels later costs several thousand dollars.
How much roof space do I need for solar?
About 350 to 400 square feet of usable, unshaded roof for an average 7 to 8 kW system, plus required setbacks.
Can solar panels go on a tile roof?
Yes, but installation is more complex and costly because tiles must be removed or replaced around the mounts.
Can I install solar on a flat roof?
Yes. Installers use tilted racking that's ballasted or attached, coordinated with the roofer to protect the roof warranty.
Do solar panels damage your roof?
Properly installed panels shouldn't. Installers seal each mount with flashing, and the panels shade and protect the roof beneath them. Poor installation can cause leaks, so check workmanship warranties.
How do I check my roof's solar potential for free?
Satellite-based tools can estimate sun exposure and usable roof area from your address. A free HomeShark report does this using rooftop solar data, and installers can confirm with an on-site assessment.