Running out of hot water halfway through a shower is a sign your water heater is too small. Paying to keep 80 gallons hot for two people is a sign it's too big. The right size depends on how many people live in your home and, more importantly, how much hot water you use during your busiest hour.
Quick answer
| Household size | Tank water heater | Tankless (gallons per minute) | Heat pump water heater |
|---|---|---|---|
| 1–2 people | 30–40 gallons | 5–6 GPM | 50 gallons |
| 2–3 people | 40–50 gallons | 6–7 GPM | 50 gallons |
| 3–4 people | 50 gallons | 7–8 GPM | 50–65 gallons |
| 5+ people | 60–80 gallons | 8–10+ GPM | 65–80 gallons |
These assume typical showers and appliances. Large soaking tubs, multiple showers running at once, or high-flow fixtures push you up a size.
Sizing a tank water heater: first-hour rating
Tank capacity alone doesn't tell the whole story. The more useful number is the first-hour rating (FHR), printed on the yellow EnergyGuide label. It's how many gallons of hot water the heater can deliver in one hour, starting with a full tank.
Estimate your peak-hour demand
Add up the hot water you use in your busiest hour, usually the morning:
| Activity | Approx. hot water used |
|---|---|
| Shower (8 minutes, standard head) | 10–15 gallons |
| Bath | 15–25 gallons |
| Dishwasher | 4–6 gallons |
| Clothes washer, warm cycle | 7–15 gallons |
| Hand washing dishes | 4 gallons |
| Shaving or hand washing | 1–2 gallons |
Example: two showers (25 gallons), a dishwasher run (5 gallons) and a load of laundry on warm (10 gallons) = about 40 gallons. Choose a water heater with a first-hour rating of at least 40 to 45 gallons.
Gas tanks heat faster than standard electric tanks, so a 40-gallon gas heater often has a higher first-hour rating than a 50-gallon electric model.
Sizing a tankless water heater: flow rate and temperature rise
Tankless water heaters heat water on demand, so they're sized by flow rate in gallons per minute (GPM), not storage.
Step 1: Add up simultaneous flow
How many fixtures might run at the same time?
| Fixture | Typical flow |
|---|---|
| Shower | 1.5–2.5 GPM |
| Bathroom faucet | 0.5–1.5 GPM |
| Kitchen faucet | 1.5–2.2 GPM |
| Dishwasher | 1–1.5 GPM |
| Clothes washer | 1.5–2 GPM |
Two showers plus a kitchen faucet might need about 5.5 to 6 GPM.
Step 2: Find your temperature rise
Subtract your incoming groundwater temperature from your target, usually 120°F. Incoming water ranges from about 40°F in northern winters to 70°F or more in the South. A 70 to 80°F rise in the North needs a much more powerful unit than a 50°F rise in Florida.
Step 3: Match the unit
Manufacturers list GPM at different temperature rises. A unit rated at 9 GPM at a 35°F rise may deliver only 5 to 6 GPM at a 70°F rise. Use the rating for your winter temperature rise.
Gas vs. electric tankless: whole-house electric tankless units need very large electrical service, often 120 to 160 amps or more, which many homes don't have. Gas tankless units need proper venting and often a larger gas line.
Sizing a heat pump water heater
Heat pump water heaters recover more slowly than standard electric tanks in heat pump mode, so it's common to size up one step. A household that used a 40-gallon electric tank often chooses a 50-gallon heat pump model, and a 50-gallon household chooses 65 gallons. A larger tank means the backup resistance elements turn on less often, which keeps more of the savings. They also need enough surrounding air space and a condensate drain. See heat pump water heater savings.
Tank vs. tankless vs. heat pump
| Standard tank | Tankless | Heat pump | |
|---|---|---|---|
| Upfront cost installed | $1,000–$2,500 | $2,500–$5,000+ | $2,500–$5,000 |
| Efficiency | Lowest | High for gas; electric is efficient at the unit but no storage losses | Highest for electric |
| Hot water supply | Limited by tank size | Continuous, limited by flow rate | Limited by tank size and recovery |
| Lifespan | 8–12 years | 15–20 years | 10–15 years |
| Space | Moderate | Small, wall-mounted | Needs space and air volume |
Signs your water heater is the wrong size
- Too small: you run out of hot water during back-to-back showers, or have to schedule laundry and dishes around showers.
- Too big: hot water never runs out but standby losses keep a large tank warm all day. That costs extra on older models.
Ways to need less hot water
Before upsizing, consider reducing demand:
- Low-flow showerheads (1.5 to 2.0 GPM) cut shower hot water use without much change in feel.
- Wash laundry in cold water.
- Fix dripping hot water faucets.
- Set the water heater to 120°F and use a mixing valve if you need a hotter tank for capacity.
- Insulate hot water pipes.
What it costs
Standard tank water heaters typically cost $1,000 to $2,500 installed, tankless units $2,500 to $5,000 or more depending on gas line and venting work, and heat pump water heaters $2,500 to $5,000. Many utilities offer rebates for heat pump water heaters, and some states with open Home Energy Rebate programs offer income-qualified rebates.
Gas vs. electric tank recovery
Recovery rate is how many gallons a water heater can heat per hour after the tank is drained. Gas tanks typically recover 30 to 45 gallons per hour, while standard electric tanks recover about 20 gallons per hour. Heat pump water heaters in heat pump mode recover more slowly still. That's why a 40-gallon gas tank can keep up with a household that would need a 50-gallon electric tank, and why heat pump models are often sized up.
Frequently asked questions
What size water heater do I need for a family of four?
Usually a 50-gallon tank with a first-hour rating of 60 to 70 gallons, a 7 to 8 GPM tankless unit, or a 50 to 65 gallon heat pump water heater.
Is a 40-gallon water heater enough for two people?
Usually yes. A 40-gallon tank with a first-hour rating of about 50 gallons is typical for one or two people.
What is a water heater first-hour rating?
It's how many gallons of hot water a tank water heater can supply in one hour starting full. It's listed on the EnergyGuide label and is the best number for sizing.
What size tankless water heater do I need?
Add up the flow rates of fixtures that might run at the same time, then choose a unit that delivers that GPM at your winter temperature rise. Many homes need 6 to 9 GPM.
Should I get a bigger heat pump water heater?
Many households size up one step, for example from 40 to 50 gallons, so the heat pump can keep up without using backup elements.
How long do water heaters last?
Standard tanks typically last 8 to 12 years, heat pump water heaters 10 to 15 years, and tankless units 15 to 20 years with maintenance.
Can I replace a gas water heater with a heat pump water heater?
Yes, but you'll need a suitable electrical circuit, enough air space and a condensate drain. New 120V plug-in models can make the switch easier in some homes.
Is a bigger water heater more expensive to run?
Slightly, because a larger tank has more surface area losing heat. Newer, well-insulated tanks and heat pump models reduce these standby losses.
What size water heater do I need for a family of five?
Usually a 60 to 80 gallon tank, an 8 to 10 GPM tankless unit, or a 65 to 80 gallon heat pump water heater, depending on peak-hour use.